▼

Monday, March 21, 2011

With a 16.5" chainstay, the tire clearance is huge. It easily fit my 2.5" Maxxis/Mavic DH wheel.  I think one might be able to use a 650b wheel with this frame.

Pretty close to close to finished with the All Mtn frame... I will still have to get the headtube reamed later in the week

Caught a glimpse of Vernon riding his Indust prototype 22" wheeled frame:

http://www.liquorbikes.com/wp-content/uploads/2011/03/vernon_whip.jpg

I hope the geometry is working out alright, its pretty hard to decide a suitable BB height on a bike that has no predecessor. The only other 22" is pretty dirt specific... very long chainstays and very low BB height)
at

3 comments:

  1. AnonymousMarch 23, 2011 at 10:52 AM

    Looking good Matt, looking very good indeed.

    Using the 1.75 tube was a good idea, it looks much nicer than a narrower one would have.

    PS, has it got chainguide tabs?

    ReplyDelete
  2. MatttyMarch 23, 2011 at 11:47 PM

    Sorry its taking so long. I will have the ISCG mount on tomorrow and will hopefully find a local shop to ream the HT...

    ReplyDelete
  3. AnonymousMarch 24, 2011 at 6:00 AM

    Don't worry about it. It's my fault for dreaming up such an awkward build. Plus the extra time has let me save up for the build!

    ReplyDelete

Note: Only a member of this blog may post a comment.