Monday, July 7, 2014

new removable mounts with set screws
new hammered silver color
New cranks. Profile column (22mm) cranks are a better choice for MTBMX frames because the spindle is 6", the cranks have a wider outset and they are a much bigger crank arm than the 19mm ones.

Those 2.5 piece cranks (that have the spindle pressed in on one side) are usually going to have clearance issues on a MTBMX with a short (14.5-15") rear end. So, if you're building a 26" skatepark bike, I would suggest a 3 piece crank with a 6" spindle.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.